RH-60 : Fume Hood With Digital Air Flow Monitor And Imported Exhaust System
Fume Hood (Stainless Steel) Frame of S.S.304gr from outside & 316 gr. inside.
- RH-60-13 Working Area Size 90x60x60cm.
- RH-60-14 Working Area Size 120x60x60cm.
- RH-60-15 Working Area Size 120x75x75cm.
- RH-60-16 Working Area Size 150x75x75cm.
Fume Hood (Mild Steel)
- RH-60-17 Working Area Size 90x60x60cm.
- RH-60-18 Working Area Size 120x60x60cm.
- RH-60-19 Working Area Size 120x75x75cm.
- RH-60-20 Working Area Size 150x75x75cm.
Description
| Design Structures : | Aerodynamic, floor mounted |
| HEPA Filter : | ISO 14644 Class 5 (Class 100) 99.97%-99.99%.Down to 0.3 micron, Mesh guard for protection of HEPA Filter |
| Air Flow Type : | Automatic bypass type |
| Construction (Exteriors): | Available in two options :-
|
| Baffle arrangement : | 2 Point suction section with baffle to ensure smooth and immediate exhaust of fumes. As per ASHRAE & EN norms. |
| Airfoil : | Flush powder coated airfoil mounted on the worktop |
| Worktop: | Available in following options.
|
| Sash (Shutter) : | Vertical Sliding Counter balanced toughened glass (5mm thick / Polycarbonate fitted in the powder coated Aluminum. Clear sash open height =500mm-675mm According to size & Fume Hood. |
| Service Fittings: | Remotely operated color coded ( as per international standard) total three services valves with SS breaded flexible hose & brass fittings (1 for water & 2 for gases) |
| Lighting: | CFL tube light (1x36W) with Polycarbonate enclosed for Better Illumination with less power concumption. |
| Electrical utilities : |
|
| Centrifugal B : | Made of 304 grade StainlessSilent high efficiency blower, consisting of continuous Rating motor and chemical resistant impeller. The blower Designed to give face velocity of 80 to 120 feet/minute (FPM) as per ANSI/AIHA Z9.5 at the safe working Height. |
| Air suction capacity: | Silent 650 CFM confirming to international face velocity Norms and a per fume hood airflow pattern. |
| Digital Air Flow: | Fitted with exhaust and HEPA Filter for enviThis device is an accessory for fume hood to indicate the Approximate face velocity of airflow with primary Purpose of warning when a low flow condition occurs. Red & LED’s correspond to low & normal flow rates. When flow decreases from normal to low an audible Alarm will also actuate requiring manual Acknowledgement for silence. |
