| The inner/outer chamber, steam jacket and boiler are made of heavy gauge SS with leak proof argon arc welding. |
| The space between the outer chamber and steam jacket is filled with glass wool to minimize thermal losses. |
| Hydraulically tested to withstand 2.5 times the working pressure. |
| Steam boiler is fitted with water level indicator, pressure gauge, low water cut off device and automatic pressure control devices. Fitted with safety valve as a safety device. |
| Drain valve is fitted at the side bottom for easy draining/clearing. |
| This affords a complete safety to the working personnel against explosive opening |
| Two separate valves are provided for evacuating steam from inner chamber and jacket as and when desired. |
| Sterilization cycle is controlled by single point multiport valve |
| The chamber discharge line is fitted with a moisture trap to absorb the condensate automatically thus preventing moistening of the loaded material to be sterilized. |
| The flanged immersion type heating element made from a very high grade material provide fast formation of pressure in the system and are protected through a electric low water level cut off device. |
| An automatic vacuum breaker is fitted to all units as a standard accessory in order to break vacuum in case of steam condensation |
| The chamber is fitted with spring loaded safety valve and a dead weight release valve. |
| All sterilizers are provided with triple safety features through a “Piezostate” (automatic pressure control system) and a spring loaded safety valve fitted to the boiler/steam generator |
| The chamber is fitted with spring loaded safety valve and a dead weight release valve. |
| The work on 220/230 or 440 volts, 3 phase, 50 Hz AC supply. |
Description
Available in different sizes:-
| Model No. : | HCA-78 | HCA-115 | HCA-162 | HCA-165 | HCA-221 |
| Sizes in Inch : | 16 x 24 | 16 x 36 | 16 x 48 | 20 x 36 | 20 x 48 |
| Sizes in MM : | 400 x 600 | 400 x 900 | 400 x 1200 | 500 x 900 | 500 x 1200 |
| Capacity(L) : | 78 | 115 | 162 | 165 | 221 |
| Heater Load : | 6KW | 6KW | 9KW | 9KW | 9KW |
Technical Specification
- Gasket: made of joint less silicon rubber.
- Exhaust pressure: manual through the exhaust valve
- Sterilizing pressure: 1.2 to 1.5 kgf/cm2 (15 to 20 psi) at 121oC
- Operating pressure: from 15 psi to 20 psi
- Pressure gauge: 0.2.1 kgf/cm2 (30 psi)
- Tubular stand and supporting ring: made of mild steel or stainless steel.
- Pressure Vessel= SS 304 Grade Stainless St
- External Wall=SS 304 Grade Stainless Steel
- Top Lid=SS 304 Grade Stainless Steel
- Basket= SS 304 High Grade Stainless Steel
Including Accessories
-
- Automatic pressure cut off switch
- Digital temperature indicator cum controller
- Vacuum breaker
- Water level indicator
- Automatic self locking system
- Automatic low water cut off switch
- Moisture trap
Optional Accessories
-
- Fully automatic PID purging system
- Fully automatic system with HMI PLC based autoclave with data logger digital pressure indicator cum controller,
Digital temperature controlled system can be installed on order - Multiport Valve
