RG-100-24 : Microprocessor Based Flame Photometer
| Range | General Range | Serum Range | Urine Range |
| ppm | meq/1 | meq1 | |
| Na : 0-100 | 0-200 meq/I, 1:100 dil | 0-250 meq/I, 1:100dil | |
| K : 0-100 | 0-10 meq/I, 1:100 dil | 0-100 meq/I, 1:100dil | |
| Ca : 0-100 | 0-10 meq/I, 1:2 dil | ||
| Li : 0-100 | 0-2 meq/I, 1:5 dil | ||
| Ba : 30-3000 (all meq values are claimed with appropriate dilution) |
Description
| Dimension / Weight : | 365x245x220mm (Approx.) / 8Kg. |
| Sensitivity : | General Mode : Na : 0.5 ppm, K : 0.5 ppm, Li: 0.5 ppm, Ca: 15ppm, Ba : 30ppm. |
| Filters : | Na & K supplied. (Ca, Li & Ba are optional at extra cost) (Ba can be factory fitted only) |
| Resolution : | 0.1 ppm / 0.1 meq. |
| Reproducibility : | <1% coefficient of variation of 20 consecutive samples using 10 ppm Na set as Maximum standard up to 3% CV for 20 consecutive samples of Concentrations between 50 to 199 ppm for Barium. |
| Linearity : | < 2% error when 3 ppm Na/K and 5 ppm Li are set as Maximum Std. |
| Curve Fit Accuracy : | ±2% of FS |
| Display : | 128×64 Graphical LCD |
| Average Time : | In-built in software |
| Flame System : | LPG & Dry oil Free Air. |
| Detector : | Photodiode |
| Calibration : | With up to 25 standard of user choice with curve fitting software ( 5 for each element). Multiple Calibration curves can be stored in the memory. |
| Gas Control : | Adjustable with knob. |
| Flame Failure : | Auto Detection. |
| Gas Cutoff : | Automatic |
| Ignition System : | Auto Ignition |
| Automiser : | Axial Flow Type |
| Printer : | Provision for attachment of Dot-Matrix Printer with centronics parallel interface. |
| PC Interface : | USB |
| ower Supply : | 230 V AC ± 10%, 50Hz |
